Offer

Floorboards

We manufacture two-layer tongue-and-groove floorboards. The 5 mm oak wear layer rests on a birch plywood base. Available sanded for DIY finishing, ready-oiled, or ready-lacquered using UV technology.

Dimensions

Total thickness14 mm

Width14 cm

Length50 – 150 cm

Cross section

Board construction

The two-layer board consists of a 5 mm oak wear layer and a birch plywood base. The oak layer has a four-sided bevel and is pre-sanded. The base layer is notched to relieve tension and improve flexibility, and also improves heat distribution when used with underfloor heating.

Quality classes

Natur Class

Natural colour and wood structure. Any grain arrangement, natural discolouration. Small knots up to 3 mm permitted. No sapwood.

Rustical Class

Varied colour and wood structure. Natural discolouration, varied grain and shade, knots above 5 mm filled with putty. Sapwood and lustre permitted.

French herringbone floor photos

French herringbone (chevron) ∠45°

Thickness14 mm

Width14 cm

Length67 cm or 60 cm

Natur Class

Rustical Class

French herringbone

Classic herringbone ∠90°

Thickness14 mm

Width14 cm

Length74 cm or 60 cm

Natur Class

Rustical Class

Classic herringbone ∠90°

Thickness14 mm

Width11 cm

Length60 cm

Natur Class

Rustical Class

Classic herringbone

Important Information

Any objections regarding the appearance of the floorboard must be reported before installation.
No complaints will be accepted after the floorboard has been installed on the subfloor.
For colour-finished floorboard, a slight difference in shade compared to the sample swatch is acceptable.
When ordering additional floorboard in a matching colour to a previously completed order, a minor shade variation is acceptable.
For the care and cleaning of oiled floorboards, it is recommended to use products from the same manufacturer whose oil was used to finish the floorboard.
After installing oiled floorboard, it is recommended to apply an additional coat of renovation wax by a professional flooring team.
We can prepare floorboard in a finished version (lacquered or oiled).
A delivered batch of material may contain up to 2% of another sorting class.
Permissible dimensional tolerances along the length are ±2 mm; longitudinal bow must not exceed 0.5% of length, and transverse bow 0.7% of width.
Floorboard dimensions may vary depending on wood moisture content – dimensional differences are approx. 0.25% per 1% change in moisture.
Concealed defects in wood structure (cracks along the grain, loose knots) that appear after several months of use are not subject to warranty claims – they are a natural characteristic of wood and cannot be detected during production.